Security Indicator Inoperative

Step	Action	Yes	No
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views
1	Did you perform the Theft Deterrent Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Theft Deterrent
2	Turn OFF the ignition. Turn ON the ignition, with the engine OFF. Observe the Reconfigurable Display on the instrument panel cluster (IPC) during the display test. Does the Reconfigurable Display illuminate during the display test?	Go to Theft Systems Description and Operation and Vehicle Theft Deterrent (VTD) Description and Operation	Go to Step 3
3	IMPORTANT: Perform the set up procedure for the replacement IPC. Refer to Instrument Panel Cluster (IPC) Programming/Synchronization in Instrument Panel, Gages and Console. Replace the instrument cluster (IPC). Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2