LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

    Fig 1: View Of IP Cluster Trim Plate
    GM318184Courtesy of GENERAL MOTORS CORP.
  1. Position the IP cluster trim plate to the instrument panel.
  2. Align the IP cluster trim plate clips to the slots in the instrument panel.
  3. Push the IP cluster trim plate clips into the slots in the instrument panel until fully seated.
  4. Reposition the steering column to the original position.
  5. Install the knee bolster. Refer to Knee Bolster Replacement .
  6. Install the IP insulator. Refer to one of the following procedures:
  7. Install the IP accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
scientia non olet · About LEMON Manuals