LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Removal Procedure

Removal Procedure

  1. Remove the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
    2. Fig 1: View Of Upper Trim Panel
    GM618058Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove the upper trim panel slowly, the retainer clips could possibly fall into the instrument panel.
  2. Lift the instrument panel (IP) upper trim panel approximately 51 mm (2 in) and pull rearward to release the retainers.
  3. Remove the DRL ambient light sensor. Refer to Daytime Running Lamps (DRL) Ambient Light Sensor Replacement in Lighting Systems.
    4. Fig 2: View Of Sun Load Sensor
    GM182418Courtesy of GENERAL MOTORS CORP.
  4. If equipped, remove the sun load sensor.
  5. Remove the IP upper trim panel.
scientia non olet · About LEMON Manuals