LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Installation Procedure

Installation Procedure

  1. Align the locating pins and the retainers from the upper trim panel to the slots in the IP.
    2. Fig 1: View Of Sun Load Sensor
    GM182418Courtesy of GENERAL MOTORS CORP.
  2. Install the DRL ambient light sensor. Refer to Daytime Running Lamps (DRL) Ambient Light Sensor Replacement in Lighting Systems.
  3. If equipped, install the sun load sensor.
    4. Fig 2: View Of Upper Trim Panel
    GM618058Courtesy of GENERAL MOTORS CORP.
  4. Push forward and down on the upper trim panel to lock into place.
  5. Install the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About LEMON Manuals