LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: The ignition switch must be in the OFF position when removing the instrument panel cluster.
  1. Remove the IP cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
    2. Fig 1: View Of Instrument Panel Cluster
    GM318190Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the IP cluster to instrument panel.
  3. Remove the IP cluster from the instrument panel.
    4. Fig 2: Locating Electrical Connectors
    GM318187Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals