LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Center Console Cupholder Door Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cupholder Assembly
    GM1458707Courtesy of GENERAL MOTORS CORP.
  1. Align the faceplate with the cupholder.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws that secure the faceplate.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Verify the cupholder for proper operation.
scientia non olet · About LEMON Manuals