LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Oldsmobile) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Outside Ambient Air Temperature Sensor
    GM318183Courtesy of GENERAL MOTORS CORP.
  1. Install the outside ambient air temperature sensor to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the outside ambient air temperature sensor to radiator (1) support bolt.

    Tighten:  Tighten the bolt to 2 N.m (18 lb in).

  4. Connect the electrical connector (2) to the outside ambient air temperature sensor.