LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Diagnostic Information and Procedures >> Change Engine Oil Indicator Inoperative

Change Engine Oil Indicator Inoperative

Change Engine Oil Indicator Inoperative

Step Action Yes No
Schematic Reference:  Instrument Cluster Schematics  
1 Did you perform the IPC Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - Instrument Cluster 
2
  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. With a scan tool, observe the Engine Oil Life percent in PCM IPC data list.
Does the scan tool display zero percent while the Change Engine Oil message is inoperative?		 Go to Step 3  System OK
3
IMPORTANT: Perform the set up procedure for the replacement IPC.
Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement .Did you complete the replacement?		 Go to Step 4  -
4 Operate the system in order to verify the repair.
Did you correct the condition?		 System OK Go to Step 2 
scientia non olet · About LEMON Manuals