LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Knee Bolster
    GM303365Courtesy of GENERAL MOTORS CORP.
  1. Install the knee bolster to the studs.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nuts that retain the knee bolster to the steering column support.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  3. Install the instrument panel accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
  4. Install the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
  5. Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left .
scientia non olet · About LEMON Manuals