LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Instrument Panel Cluster
GM298989Courtesy of GENERAL MOTORS CORP.
  1. Install the instrument panel cluster to the instrument panel.
  2. Connect the electrical connector to the instrument panel cluster.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to instrument panel cluster.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  4. Install the instrument panel accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
scientia non olet · About LEMON Manuals