LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

    Fig 1: View Of Instrument Panel Sound Insulator
    GM303360Courtesy of GENERAL MOTORS CORP.
  1. Install the instrument panel sound insulator to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws that retain the instrument panel sound insulator to the following components:
    • The instrument panel
    • The cowl

      Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

scientia non olet · About LEMON Manuals