LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower >> Removal Procedure

Removal Procedure

  1. Remove the center console from the vehicle if equipped with RPO code YC7 (GMC Envoy). Refer to Console Replacement - Front Floor (Full Length (Auto Trans)) , Console Replacement - Front Floor (Full Length (Envoy)) , Console Replacement - Front Floor (Non-Full Length)  or Console Replacement - Front Floor (Full-Length (Manual Trans)) .
    2. Fig 1: View Of instrument Panel Sound Insulator
    GM303359Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws that retain the instrument panel sound insulator to the following components:
    • The knee bolster
    • The instrument panel
    • The heater assembly
    • The floor duct
  3. Remove the instrument panel sound insulator from the vehicle.
  4. Disconnect the electrical connector from the accessory power outlet, if equipped.
scientia non olet · About LEMON Manuals