LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Steering Column >> Removal Procedure

Removal Procedure

    IMPORTANT: The steering column support is not serviceable.
  1. Remove the instrument panel. Refer to Instrument Panel (I/P) Carrier Replacement .
  2. Remove the brake switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes.
  3. Remove the brake booster pushrod from the brake pedal. Refer to Vacuum Brake Booster Replacement in Hydraulic Brakes.
  4. Remove the clutch master cylinder pushrod from the clutch pedal, if equipped. Refer to Clutch Pedal Replacement in Clutch.
    5. Fig 1: View Of Steering Column Bracket
    GM303371Courtesy of GENERAL MOTORS CORP.
  5. Remove the following steering column support fasteners:
    • The 4 flange nuts
    • The 2 bolts
  6. Remove the brake pedal from the steering column support. Refer to Brake Pedal Assembly Replacement in Hydraulic Brakes.
scientia non olet · About LEMON Manuals