LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of I/P Cluster Wire Harness Connector
    GM1207644Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P cluster wire harness connector.
  2. Install the I/P cluster.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the I/P cluster screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  4. Install the I/P cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster .
scientia non olet · About LEMON Manuals