LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Ignition Switch Lock Cylinder Replacement >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster. Refer toKnee Bolster Replacement .
  2. Turn ignition switch to the run position.
  3. Push the ignition lock cylinder tab.
    4. Fig 1: View Of Ignition Lock Cylinder
    GM1207714Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition lock cylinder.
scientia non olet · About LEMON Manuals