LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right console trim panel. Refer to Console Trim Panel Replacement - Right .
  2. Remove the left console trim panel. Refer to Console Trim Panel Replacement - Left .
    3. Fig 1: View Of Front Console Screws
    GM1207902Courtesy of GENERAL MOTORS CORP.
  3. Remove the front console screw covers from behind the console.
  4. Remove the front console screws.
  5. Position the front seats to the full forward position.
    6. Fig 2: View Of Rear Console Bolts
    GM1207907Courtesy of GENERAL MOTORS CORP.
  6. Remove the rear console bolts.
  7. Place the shifter in drive.
    8. Fig 3: View Of Pen Tray
    GM1207906Courtesy of GENERAL MOTORS CORP.
  8. Remove the pen tray.
    9. IMPORTANT: Do not let the console contact the shifter handle or bezel.
    Fig 4: View Of Electrical Connectors And Console
    GM1207909Courtesy of GENERAL MOTORS CORP.
  9. Disconnect the electrical connectors and remove the console.
scientia non olet · About LEMON Manuals