LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions - 1 Of 5)) >> On-Vehicle Repair Instructions (Part 1) >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Crankshaft Front Oil Seal
    GM1210996Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.
  1. Use the J 29184  or equivalent to install the crankshaft front oil seal. See Special Tools .
  2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals