LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions - 4 Of 5)) >> Off-Vehicle Repair Instructions (Part 3) >> Oil Pump Installation

Oil Pump Installation

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Oil Pump Assembly
    GM1579118Courtesy of GENERAL MOTORS CORP.
  1. Align the oil pump generator with the crankshaft flats and install the oil pump to the engine block.
  2. Align the pump body with the mounting holes in the cylinder block.
    3. NOTE: Refer to Fastener Notice .
  3. Install the oil pump bolts.

    Tighten:  Tighten the oil pump bolts to 23 N.m (17 lb ft).

scientia non olet · About LEMON Manuals