LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) left trim panels. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left .
  2. Remove the I/P right trim panels. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right .
  3. Remove the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) .
  4. Remove the knee bolster. Refer to Knee Bolster Replacement .
    5. Fig 1: View Of I/P Center Trim Bezel
    GM1207647Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The I/P center trim bezel is painted and can be damaged. Pull on the bottom of the bezel to disengage the lower clips first or damage to the HVAC control module could occur.
  5. Remove the I/P center trim bezel.
  6. Remove the hazard switch. Refer to Hazard Warning Switch Replacement in Lighting Systems.
scientia non olet · About LEMON Manuals