LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Knee Bolster
    GM1207615Courtesy of GENERAL MOTORS CORP.
  1. Install the knee bolster.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten the knee bolster screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the left closeout panel. Refer to Closeout/Insulator Panel Replacement - Left .
  4. Install the I/P left trim panels. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left .
  5. Install the I/P left outer trim cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .
scientia non olet · About LEMON Manuals