LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Cup Holder Replacement - Front Floor Console - Rear >> Installation Procedure

Installation Procedure

  1. Engage the cupholder to the hooks at the top of the floor console and install the cupholder.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Console Rear Cup Holder Screws
    GM1208000Courtesy of GENERAL MOTORS CORP.
  3. Install the console rear cup holder screws.

    Tighten:  Tighten the screws to 1 N.m (10 lb in).

  4. Install the console armrest. Refer to Console Armrest Replacement - Front Floor .