LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Knee Bolster >> Installation Procedure

Installation Procedure

    Fig 1: View Of Knee Bolster Bracket
    GM1206839Courtesy of GENERAL MOTORS CORP.
  1. Install the knee bolster bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the knee bolster bracket nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  3. Install the I/P pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) .
scientia non olet · About LEMON Manuals