LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Console Floor (UK6) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Console Bracket
    GM1208010Courtesy of GENERAL MOTORS CORP.
  1. Install the console bracket.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the console bracket screws.

    Tighten:  Tighten the screws to 1 N.m (10 lb in).

  4. Install the console rear trim plate. Refer to Trim Plate Replacement - Console Rear (UK6)  and Trim Plate Replacement - Console Rear (U32) .