LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Bracket Replacement - Right >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (IP) lower trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower (Impala)  or Instrument Panel (I/P) Trim Panel Replacement - Lower (Monte Carlo) .
  2. Reposition the right IP accessory wiring junction block.
  3. Disconnect the wiring harness retainers from the knee bolster bracket.
  4. Remove the bracket bolts from the IP passenger knee bolster.
  5. Remove the bracket from the IP passenger knee bolster.
    6. Fig 1: Knee Bolster & Bracket
    GM455173Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals