LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Bracket Replacement - Left >> Removal Procedure

Removal Procedure

  1. Remove the left instrument panel (IP) insulator. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the steering column filler panel. Refer to Steering Column Filler Replacement .
  3. Remove the bracket bolts from the IP driver knee bolster at the IP lower trim panel.
    4. Fig 1: IP Driver Knee Bolster To Lower Trim Panel Bracket Bolts
    GM787418Courtesy of GENERAL MOTORS CORP.
  4. Remove the bracket bolts from the IP knee bolster at the instrument carrier. Remove the IP knee bolster bracket.
    5. Fig 2: IP Knee Bolster To Instrument Carrier Bracket Bolts
    GM454278Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals