LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

  1. Insert the courtesy lamp socket to the insulator opening. Rotate the socket clockwise.
  2. Align and install the insulator with the push-in the retainer.
  3. Lift upward on the insulator. Install the insulator retainers to the lower /IP trim pad openings.
    4. Fig 1: Insulator Panel
    GM519324Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals