LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

  1. Install the insulator to the stud at the accelerator pedal.
    2. Fig 1: Installing Insulator To Accelerator Pedal
    GM455211Courtesy of GENERAL MOTORS CORP.
  2. Insert the courtesy lamp socket to the insulator opening. Rotate the socket clockwise.
  3. Install the insulator retainers to the lower I/P trim pad openings.
    4. Fig 2: Installing Insulator Retainers
    GM519316Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals