LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the ambient temperature sensor to the radiator air baffle.
  2. Connect the electrical connector to the ambient temperature sensor.
    3. Fig 1: Ambient Temperature Sensor & Electrical Connector
    GM551891Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
  4. Drive the vehicle at a speed of 32 km/h (20 mph) for approximately 1 1/2 minutes or at a speed of 72 km/h (45 mph) for approximately 1 minute in order to obtain the ambient update.
scientia non olet · About LEMON Manuals