LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Coin Storage And Screws
    GM1256638Courtesy of GENERAL MOTORS CORP.
  1. Remove the coin storage and the screws.
  2. Separate the hood release cable from the hood latch release handle.
  3. Carefully pull the instrument panel under cover until the mounting clips are released and the instrument panel under cover.
    4. Fig 2: View Of Driver Side Knee Bolster And Bolts
    GM1256639Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the driver side knee bolster.
  5. Remove the knee bolster.
scientia non olet · About LEMON Manuals