LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Driver Side Knee Bolster And Bolts
    GM1256639Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the knee bolster with the bolts.

    Tighten:  Tighten the driver side knee bolster mounting bolts to 10 N.m (89 lb in)  .

    2. Fig 2: View Of Coin Storage And Screws
    GM1256638Courtesy of GENERAL MOTORS CORP.
  2. Install the instrument panel under cover.
  3. Connect the hood release cable to the hood latch release handle.
  4. Install the coin storage and the screws.
scientia non olet · About LEMON Manuals