Removal Procedure
- Disconnect the negative battery cable.
- Remove the floor console. Refer to Console Replacement - Front Floor in Interior Trim.
- Remove the sun sensor. Refer to Sun Load Sensor Replacement in HVAC Systems-Automatic.
- Remove the tweeter speakers and the stereo cassette Am/FM radio. Refer to Radio Replacement in Entertainment.
- Remove the instrument cluster dimmer switch assembly. Refer to Instrument Cluster Dimmer/Headlamp Leveling Switch Replacement in Lighting Systems.
- Remove the instrument cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
- Remove the HVAC controls assembly. Refer to HVAC Control Assembly Replacement .
- Remove the instrument cluster. Refer to Instrument Panel Cluster (IPC) Replacement .
- Remove the kick panels. Refer to Trim Panel Replacement - Hinge Pillar in Interior Trim.
- Remove the glove box. Refer to Storage Compartment Replacement - Instrument Panel (I/P) .
- Remove the screws and the glove box housing.
- Disconnect the glove box housing electrical connectors.
- Remove the knee bolster. Refer to Knee Bolster Replacement in Interior Trim.
- Remove the screws and the instrument panel side covers.
- Remove the screw and instrument panel fuse block.
- Remove the nuts and the bolts securing the steering column.
- Disconnect the steering column electrical connector.
- Lower the steering column.
- Remove the instrument panel bolts below the windshield.
- Remove the instrument panel screw behind the glove box brace.
- Remove the fixing screws securing the instrument panel.
- Remove the bolts securing the sides of the instrument panel to the body.
- Disconnect the instrument panel electrical connectors.
- Remove the instrument panel.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.