LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Cigar Lighter Housing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cigar Lighter And Components
    GM1256560Courtesy of GENERAL MOTORS CORP.
  1. Install the cigar lighter housing in the ashtray housing.
  2. Install the cigar lighter in the cigar lighter housing.
  3. Connect the cigar lighter electrical connector.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the ashtray housing.

    Tighten:  Tighten the ashtray housing screws to 2.5 N.m (22 lb in)  .

    5. Fig 2: Identifying Cigar Lighter Electrical Connectors
    GM1256559Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connectors.
  6. Install the ashtray housing trim panel with the screws.

    Tighten:  Tighten the ashtray housing screws to 2.5 N.m (22 b in)  .

  7. Install the shift lever trim panel.
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals