Installation Procedure

Fig 1: Identifying Cigar Lighter Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Install the ashtray lamp. Refer to Ashtray Lamp Bulb Replacement in Lighting Systems.
Install the cigar lighter. Refer to Cigar Lighter Housing Replacement .
Connect the electrical connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws and the ashtray trim panel.
Tighten: Tighten the ashtray housing screws to 2.5 N.m (22 lb in) .
Install the console cover.
Connect the negative battery cable.