Cigar Lighter Inoperative
| Step | Action | Values | Yes | No |
|---|---|---|---|---|
| 1 | Inspect fuse F13. Is the fuse open? |
- | Go to Step 2 | Go to Step 3 |
| 2 |
|
- | System OK | - |
| 3 |
|
11-14 V | Go to Step 5 | Go to Step 4 |
| 4 | Repair the open power supply circuit for fuse F13. Is the repair complete? |
- | System OK | - |
| 5 |
|
11-14 V | Go to Step 7 | Go to Step 6 |
| 6 | Repair the open circuit between the fuse F13 and the cigar lighter. Is the repair complete? |
- | System OK | - |
| 7 | With the ignition key still in the ACC position, use an ohmmeter to measure continuity between terminal 1 of the cigar lighter connector and ground. Does the battery voltage measure with the specified range? |
11-14 V | Go to Step 9 | Go to Step 8 |
| 8 | Repair the open ground circuit. Is the repair complete? |
- | System OK | - |
| 9 | Replace the cigar lighter. Refer to Cigar Lighter Housing Replacement . Is the repair complete? |
- | System OK | - |