Torque Converter Clutch (TCC) Slip - 100 RPM Slip
WARNING: This page is about a different variant/trim than selected.
TCC Slip (100 RPM)
| Checks |
Causes |
| Valve Body Assembly (60) |
- TCC/PWM solenoid leaks
- Regulator apply valve or converter clutch shift valve sticking or side loading
|
| Oil Pump Assembly (4) |
- Stator shaft bushings worn, due to scratched turbine shaft journal (replace bushings and input housing assembly)
- TCC apply valve is stuck open
- TCC solenoid leaking
|
| Input Housing and Turbine Shaft Assembly (621) |
- Scratched journal on turbine shaft
- Turbine shaft O-ring cut
- Turbine shaft hole not drilled to full depth
|