LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (Repair Instructions -- 1 Of 3) -- 4.8L, 5.3L & 6.0L) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Oil Pan Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install a new oil pan cover gasket (3), the cover (2) and bolts (1).

    Tighten:  Tighten the bolts to 12 N.m (106 lb in).

  2. Fig 1: View Of Oil Pan Cover, Bolts & Gasket
    GM260125Courtesy of GENERAL MOTORS CORP.
  3. Refill the engine oil. Refer to Capacities - Approximate Fluid and/or Fluid and Lubricant Recommendations in Maintenance and Lubrication.