LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (Repair Instructions -- 1 Of 3) -- 4.8L, 5.3L & 6.0L) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement - Air Conditioning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the A/C belt tensioner.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the A/C belt tensioner bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

    3. Fig 1: View Of A/C Belt Tensioner
    GM678806Courtesy of GENERAL MOTORS CORP.
  3. Install the A/C drive belt. Refer to Drive Belt Replacement - Air Conditioning .
scientia non olet · About LEMON Manuals