Conditions for Clearing the DTC
WARNING: This page is about a different variant/trim than selected.
- A current DTC Last Test Failed clears when the diagnostic runs and passes.
- A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other non-emission related diagnostic.
- Clear the DTC with a scan tool.
DTC P1380
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check-Engine Controls? | Go to Diagnostic System Check - ABS (W/O JL4) or Diagnostic System Check - ABS (W/JL4) in Antilock Brake System | Go to Diagnostic System Check - Engine Controls |