LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - 4.8L, 5.3L & 6.0L (Introduction)) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (2500 Series) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Pressure Sensor (2500 Series)
    GM1312086Courtesy of GENERAL MOTORS CORP.
  1. Remove the intermediate fuel and evaporative emission (EVAP) lines. Refer to Fuel Hose/Pipes Assembly Replacement (1500 Series)  or Fuel Hose/Pipes Assembly Replacement (1500 Series - 5.3L (L59) Engine)  or Fuel Hose/Pipes Assembly Replacement (2500 Series - Front Tank)  or Fuel Hose/Pipes Assembly Replacement (2500 Series - Intermediate) .
  2. Gently pry straight up, in order to remove the fuel pressure sensor (1).
scientia non olet · About LEMON Manuals