LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 4.8L, 5.3L & 6.0L (DTC P0140 Or P0160 To DTC P0449)) >> Diagnostic Information and Procedures >> DTC P0335 >> Circuit Description

Circuit Description

WARNING: This page is about a different variant/trim than selected.

The crankshaft position (CKP) sensor signal indicates the crankshaft speed and position. The CKP sensor circuits are connected directly to the powertrain control module (PCM) and consists of the following circuits:

If the PCM detects there is no signal from the CKP sensor for 8 seconds, DTC P0335 sets.

scientia non olet · About LEMON Manuals