LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical (Repair Instructions -- 2 Of 3) -- 4.8L, 5.3L & 6.0L) >> Repair Instructions (Off-Vehicle - Part 2) >> Engine Flywheel Cleaning and Inspection

Engine Flywheel Cleaning and Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Clean the flywheel in solvent.
  2. Dry the flywheel with compressed air.
  3. Inspect the automatic transmission flywheel for the following conditions:
    • Damaged ring gear teeth
    • Stress cracks around the flywheel-to-crankshaft bolt hole locations
      • IMPORTANT: Do not attempt to repair the welded areas that retain the ring gear to the flywheel plate. Install a new flywheel.
    • Welded areas that retain the ring gear onto the flywheel for cracking
    4. Fig 1: View Of Engine Flywheel & Bolt
    GM178458Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals