LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Transfer Case - BW 4481-Nr3) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac Escalade EXT, 2004 Cadillac Escalade ESV, and 2004 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
    IMPORTANT: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825  . See Special Tools and Equipment .
  2. Using J 23907  (1), and J 36825  (2), remove the input seal. See Special Tools and Equipment .
    3. Fig 1: Removing Input Shaft Seal Using J 23907 & J 36825
    GM819621Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals