LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Engine Cooling System) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank Inlet Hose
    GM721988Courtesy of GENERAL MOTORS CORP.
  1. Install the vent inlet hose to the surge tank.
  2. Reposition the vent inlet hose clamp to the surge tank.
  3. Install the vent inlet hose to the radiator.
  4. Reposition the vent inlet hose clamp to the radiator.
  5. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals