Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Yukon XL and 2004 GMC Yukon. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift control switch to the housing.

Fig 1: View Of Shift Control Switch

Courtesy of GENERAL MOTORS CORP.

Install the headlamp, shift control, and cargo lamp switch housing.
Connect the following electrical connectors:
- Cargo lamp switch (1)
- Shift control switch (2, 3)
- Headlamp switch (4)

Fig 2: View Of Cargo Lamp Switch, Shift Control Switch & Headlamp Switch Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Push in the headlamp, shift control, and cargo lamp switches in order to engage the retainers.
Install the air deflector louver.

Fig 3: View Of Air Deflector Louver, Retainers & Switches

Courtesy of GENERAL MOTORS CORP.

Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.