Transfer Case Control Connectors
WARNING: This page is about a different car, the 2004 GMC Yukon XL and 2004 GMC Yukon. However, it is still accessible from the selected car via links, so may be relevant.
Transfer Case Shift Control Module - C1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1 | DK GRN/ WHT |
1133 | ATC Class 2 Serial Data |
| A2-A3 | - | - | Not Used |
| A4 | PPL/WHT | 1565 | 4 LO Indicator Control |
| A5 | PNK | 1561 | AWD Indicator Control |
| A6 | LT BLU | 1693 | Switch Signal |
| A7 | RED/WHT | 1556 | Channel C Encoder - Signal |
| A8 | - | - | Not Used |
| B1 | - | - | Not Used |
| B2 | YEL/BLK | 1558 | Channel B Encoder - Signal |
| B3 | - | - | Not Used |
| B4 | BRN | 1560 | Neutral Indicator Control |
| B5 | GRY/BLK | 1694 | 4WD Low Signal |
| B6 | BRN/WHT | 1555 | Channel P Encoder - Signal |
| B7-B8 | - | - | Not Used |
Transfer Case Shift Control Module - C2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A1-A7 | - | - | Not Used |
| A8 | BLK/WHT | 1554 | Encoder Signal Ground |
| B1-B5 | - | - | Not Used |
| B6 | DK BLU/ WHT |
1557 | Channel A Encoder - Signal |
| B7 | - | - | Not Used |
| B8 | GRY | 596 | 5-Volt Reference |
Transfer Case Shift Control Module - C3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 2150 | Ground |
| B | ORN | 1640 | Battery Positive Voltage |
| C | RED | 1553 | Motor Control A |
| D | BLK | 1552 | Motor Control B |
Transfer Case Shift Control Switch - C1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 1050 | Ground |
| B | - | - | Not Used |
| C | BRN | 1560 | Neutral Indicator Control |
| D | - | - | Not Used |
| E | PPL/WHT | 1382 | LED Dimming Supply |
| F | BRN/WHT | 230 | Instrument Panel Lamps Dimming Control |
| G | BRN | 241 | Ignition 3 Voltage |
| H | GRY | 596 | 5-Volt Reference |
Transfer Case Shift Control Switch - C2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A-B | - | - | Not Used |
| C | PNK | 1561 | AWD Indicator Control |
| D | PPL/WHT | 1565 | 4 LO Indicator Control |
| E | - | - | Not Used |
| F | LT BLU | 1693 | Switch Signal |
Transfer Case - Encoder Motor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK/WHT | 1554 | Encoder Signal Ground |
| B | BRN/WHT | 1555 | Channel P Encoder - Signal |
| C | RED/WHT | 1556 | Channel C Encoder - Signal |
| D | BLK | 1552 | Motor Control B |
| E | RED | 1553 | Motor Control A |
| G | PNK | 39 | Ignition 1 Voltage |
| H | LT BLU | 1693 | Switch Signal |
| F | - | - | Not Used |
| G | YEL/BLK | 1558 | Channel B Encoder - Signal |
| H | DK BLU/ WHT |
1557 | Channel A Encoder - Signal |