Installation Procedure
- Connect all of the electrical connectors (1, 2, 3).
- Install the bolts connecting the lower trim panel to the I/P assembly.
Tighten: Tighten the bolts to 2 N.m (18 lb in).
- Install the center console, if equipped. Refer to Console Replacement (w/Console Mounting Bracket) or Console Replacement (w/o Console Mounting Bracket) .
- Install the I/P cluster trim bezel. Refer to Instrument Panel Cluster (IPC) Replacement .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.