LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

  1. Install the I/P harness to the vehicle.
  2. Install the harness grommet to the cowl.
  3. Connect the wire harness to the hood, if equipped with underhood camp.
    4. Fig 1: Installing Instrument Panel Harness
    GM603160Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical harness from the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement .
  5. Install the driver's side seat, if equipped with power. Refer to Seat Replacement - Front Bucket
  6. Install the driver's side hinge pillar trim panel. Refer to Trim Panel Replacement - Hinge Pillar .
  7. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement .
scientia non olet · About LEMON Manuals