LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Replacement (w/Console Mounting Bracket) >> Removal Procedure

Removal Procedure

  1. Remove both front seats. Refer to Seat Replacement - Front Bucket in Seats.
  2. If equipped with a Bose® amplifier, remove the radio amp fuse located under the hood electrical center. Refer to Electrical Center Identification Views in Wiring Systems.
  3. Remove the upper console bezel. Refer to Bezel Replacement - Floor Console (Non-Luxury Upper)  or Bezel Replacement - Floor Console (Luxury Upper) .
  4. Remove the cupholder. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Platinum) .
  5. Remove the screws (1) retaining the console to the I/P.
  6. Disconnect the wire connectors.
  7. Remove the console assembly from the vehicle.
    8. Fig 1: Identifying Bolts Retaining Console To Instrument Panel
    GM854810Courtesy of GENERAL MOTORS CORP.
  8. Remove the rear seat audio control from the console, if equipped. Refer to Audio Control Replacement - Rear Seat in Entertainment.
scientia non olet · About LEMON Manuals