LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Console Floor >> Removal Procedure

Removal Procedure

  1. Remove both front seats. Refer to Seat Replacement - Front Bucket in Seats.
  2. Remove the upper console bezel. Refer to Bezel Replacement - Floor Console (Non-Luxury Upper)  or Bezel Replacement - Floor Console (Luxury Upper) .
  3. Remove the cupholder. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Platinum) .
  4. Remove the screws (1) retaining the console to the I/P.
  5. Move the console assembly rearwards in order to disconnect the wire connectors.
  6. Remove the console assembly from the vehicle.
    7. Fig 1: Identifying Bolts Retaining Console To Instrument Panel
    GM854810Courtesy of GENERAL MOTORS CORP.
  7. Remove the console bin. Refer to Console Storage Bin Replacement (Except Pro) .
  8. Remove the amplifier and bracket from the console bracket.
  9. Remove the vehicle sensor from the bracket. Refer to Yaw Rate Sensor/Lateral Accelerometer Replacement in Antilock Brake System.
  10. Remove the fasteners retaining the console to the bracket.
scientia non olet · About LEMON Manuals