LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Blower Replacement - Cupholder - Front Floor Console >> Removal Procedure

Removal Procedure

  1. Remove the console cup holder assembly. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Platinum) .
  2. Remove the 2 retaining screws.
  3. Slide the blower assembly upwards.
    4. Fig 1: Removing Retaining Screws & Sliding Blower Assembly Upwards
    GM1410123Courtesy of GENERAL MOTORS CORP.
  4. Insert a small flat-bladed tool to release the tab (2) that secures the connector in place.
  5. Remove the blower from the cupholder assembly.
    6. Fig 2: Releasing Tab Securing Connector
    GM1410119Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals